Car exhaust how much

Rust or splitting on the pipe itself, all exhausts corrode over time but excessive damage should spark concern.

Low hanging or dragging exhaust pipe, this may even detach endangering other road users. Reduced fuel efficiency - this may be the result of a number of things including a leak. A hissing noise may be a sign that you have a crack in the exhaust pipe which needs addressing efficiently. Chugging sounds suggest that there is an issue with the flow of gases in the exhaust system. It is located at the very end of the exhaust line and it is the most common muffler on cars.

So what happens if your muffler falls off? If the muffler has a hole in it, carbon monoxide can leak into the passenger cabin and your vehicle is unsafe to drive. Carbon monoxide can cause dizziness, nausea, and headaches. Unconsciousness and death can occur if you are exposed to this gas for a long period of time.

Based on U. The most common muffler repairs are patching holes, tightening a loose connection, and re-welding a dangling muffler back in place. You can drive it until the small hole becomes bigger and louder. This will draw the attention of the police and you will be ticketed. You may be lucky and they off with a warning to fix it within a certain amount of time.

Usually 2 week days. Modern car exhausts are typically made from either chrome or stainless steel, and are designed to last for the life of the car. High quality non-stainless steel exhausts will last for about five years — the exhaust pipe is exposed to very high temperatures that over time can cause rust, wear, holes and cracking.

Here are a few warning signs to keep your eye on that indicate your muffler needs to be replaced soon:. The only difference between a cat-back and an axle-back exhaust is the length of tubing — both include a new muffler. Both cat-back and axle-back systems include tubing, a muffler s , and then all the hardware needed to mount the new system in place of the factory system.

Most of the time, these systems use the factory exhaust hangers to make install as easy as possible. Since a high-performance muffler is a part of a cat-back or axle-back exhaust system, buying a muffler by itself is usually the least expensive option in terms of parts cost. Keep in mind, however, that mufflers have higher labor costs.

The biggest advantage in purchasing a full cat-back or axle-back system is that install is really simple. Many of these systems can be installed at home with basic tools. Conversely, installing a muffler at home may not be so simple — cutting and welding may be required.

The other advantage in a full cat-back or axle-back system is that they are often tuned to your specific vehicle and the included muffler s. All things being equal, a cat-back or axle-back system will perform slightly better than a muffler only. The main difference between a stainless steel exhaust system and an aluminized or galvanized system is durability. Stainless systems will last a lifetime due to their ability to resist corrosion, with series stainless systems being more resistant than series systems only the difference is slight.

In fact, stainless steel tends to be slightly thinner than aluminizied steel. If anything, an aluminized system may have better sound quality. Having said that, the muffler itself is the biggest factor in sound. If you live in an area where corrosion risks are high such as cold-weather areas that use salt to de-ice roadways , stainless steel may be a reasonable upgrade because it will resist rust.

On the other hand, if your local environment is dry and the corrosion risks are low, the only reason to buy a stainless system is for looks. There are probably thousands of different exhaust system tips available. Generally speaking, you get what you pay for.

If you like the blue coloring, titanium is probably your best choice. If you want the shiny look, chrome is the way to go. If you purchase a cat-back or axle-back exhaust system, labor costs are often very low. These systems bolt-on and use the existing factory hangers. In fact, many performance shops will install a cat-back exhaust system free of charge if you purchase it directly from them.

If the installation requires a lot of fabrication, you may be better off buying a cat-back or axle-back system instead. That was from Midas in Sydney bankstown. Eric — Completely agreed. Good comment. I just want to state that your assertion that series stainless steel has more corrosion resistance than series stainless steel is false. The level of Chromium and Molybdenum content is directly proportional to the level of corrosion resistance and series stainless has less than series stainless of both elements.

Ezareth — You are correct. Not sure if I mis-read that or if I found some bad info, but either way it was wrong. I fixed it. Thank you. I know that no major aftermarket makes an exhaust system that fits to my car.

Well that I know of… I own a Camry. I want to replace work that was previously done to install a muffler that turned out not to be as great as it claimed. The changes made to make the muffler fit can be fixed very easily I made sure of that when they installed and started welding everything.

Just a few bolts here and there but finding one that fits is a challenge for me. Hey guys I have a Ford Falcon xr6 model and I want the best advice on which exhaust system to install. Does Flowmaster or Magnaflow or Borla offer systems in Australia? If so, that would be the place to start.

I have a chevy camaro ss i am looking for just sound. I checked on ebay and the sell axle back …. Shawn — That will do it. I was told that the exhaust needs to be replaced.

Is this car worth buying and if so, how much am I looking to spend on getting the exhaust replaced? My advice: Get it inspected by a professional used vehicle inspector. Was told this would be roughly 3 hours worth of labour from a local shop. Or am I better off getting a full system put on. Hello, I have a Camaro rally sport and I want it to be really loud, from cold start to sitting at a light, I have about 3, to spend. I have holden berlina , i wana increase power and noise, dual fuel system just wondering what system would best suit what im after, Thanks.

Mild steel is the cheapest but will rust much quicker. The higher-priced exhaust systems are stainless steel or aluminized steel. Stainless steel can resist corrosion, while aluminized steel mufflers may have better sound quality than stainless steel.

Dealership installations tend to cost the most, while independent mechanics are usually expensive and may vary depending on the area. If you have the skills and tools, you can save some money and do the installation yourself. With the right tools, parts, patience, and the necessary skills, you can install a new exhaust system yourself. It is relatively straight forward as long as you use the right replacement parts for your vehicle.

Follow the steps below to install your new exhaust system successfully, but first, you must familiarize yourself with the essential components and their functions. The construction of the exhaust system may vary with design styles, but in general, the exhaust system comprises of five parts:.